Phi Vision direct/indirect

Phi Vision direct/indirect is a stylish microprismatic luminaire for offices and schools with a flat and uniform light surface. The luminaire's effect surface and finished exterior give a high quality and dignified overall impression.

Phi Vision's wide aperture allows for a soft and glare-free lighting finish. The luminaire is available in two different lengths, suitable for both general and task lighting. The line mounting allows for a long and continuous, uninterrupted or discontinuous light line.

Area of use: offices, open offices and schools
Installation: hanging

Benefits

Phi Vision direct/indirect has a very even and uniform light surface with low glare levels.

Phi Vision can be installed with a wire rope or in-line. The luminaire is easy to connect and does not need to be opened for installation. There are no visible screws and the wires and cables can be hidden discreetly in a recess on top of the body.

Control options include cord switch, DALI 1 or DALI 2 motion sensor (to be connected to DALI), DALI and Casambi wireless control with or without motion sensor.

The standard colour of the luminaire is white (RAL 9003) with effect finish and optionally available in black (RAL 9005) with effect finish and other colour options according to the RAL chart (additional colours with black or white head).

Applicability

Phi Vision direct/indirect is suitable for offices and schools for general and task lighting.

The Phi Vision 75° optic features a microprism and a diffuser to provide glare-free light thanks to its rotationally symmetrical light distribution. The DSE workplace lighting glare requirements (EN 12464-1: DSE L65 ˂ 3000 cd/m²) are exceeded by Phi Vision 1160 UP55-D45 35W, Phi Vision 1720 UP50-D50 56W and Phi Vision 1720 UP60-D40 66W. The WELL certification glare requirements (L45/90 < 6000 cd/m² or UGR < 16) are not met by Phi Vision 1160 UP55-D45 35W, Phi Vision 1720 UP50-D50 56W and Phi Vision 1720 UP60-D40 66W.

Phi Vision's top and bottom light are separately adjustable with a single ballast, allowing for human-centric lighting.

Variants

Model	Type code	Power	Luminous flux	Luminaire efficacy	Lifetime	Operating temperature
Phi Vision 1160 UP55-D45	GLPV01DIRI03511	35 W	4800 lm	137 lm/W	L80B50>100 000h, L90B50>70 000h, C10 100 000h	0 - +40°C
Phi Vision 1160 UP25-D75	GLPV01DIRI04411	44 W	6000 lm	136 lm/W	L80B50>100 000h, L90B50>70 000h, C10 100 000h	0 - +40°C
Phi Vision 1720 UP50-D50	GLPV01DIRI05617	56 W	7640 lm	136 lm/W	L80B50>100 000h, L90B50>70 000h, C10 100 000h	0 - +40°C
Phi Vision 1720 UP30-D70	GLPV01DIRI07017	70 W	9450 lm	135 lm/W	L80B50>100 000h, L90B50>70 000h, C10 75 000h	0 - +30°C
Phi Vision 1720 UP60-D40	GLPV01DIRI06617	66 W	8910 lm	135 lm/W	L80B50>100 000h, L90B50>70 000h, C10 100 000h	0 - +35°C

Dimensions

Model	Type code	Length (L)	Height (H)	Width (W)	Weight
Phi Vision 1160 UP55-D45	GLPV01DIRI03511	1160 mm	71 mm	103 mm	4,1 kg
Phi Vision 1160 UP25-D75	GLPV01DIRI04411	1160 mm	71 mm	103 mm	4,1 kg
Phi Vision 1720 UP50-D50	GLPV01DIRI05617	1720 mm	71 mm	103 mm	5,0 kg
Phi Vision 1720 UP30-D70	GLPV01DIRI07017	1720 mm	71 mm	103 mm	5,0 kg
Phi Vision 1720 UP60-D40	GLPV01DIRI06617	1720 mm	71 mm	103 mm	5,0 kg

Colour temperature:
3000 K, 4000 K, 5000 K ⁽²

Colour rendering index:
RA≥ 80, 90

Optics:
Microprism+Diffuser (soft 75°)

Light source protection:
PMMA

Enclosure class:
IP20

Supply voltage:
220-240 Vac

Frequency:
50-60 Hz

PF:
>0,9

THD:
<20%

Switching:
Chainable max 5*2,^5mm2 OR max 3*2,^5mm2 and DALI +/-.

Controllability:
Casambi, DALI(DT6)⁽¹, On/off, Naruko switch⁽³

Colour:
White (RAL9003) with effect finish as standard. Optional black (RAL9005) with effect finish, galvanized and other standard RAL colours.

Body material:
Steel

Warranty:
5 years, STUL warranty 2 years from delivery - not for control components

Accessories (installation):
3m cable fixing kit, T-bar bracket.

Accessories (other):
Daylight and motion sensor integrated in the luminaire for Casambi controller or separate DALI system (DALI 1 or DALI 2), DALI 2 power supply.

Notes:
1)Two DALI addresses for all power versions

2) SDCM ≤3

3) By means of a tamper switch, the high and low light are adjusted simultaneously, not separately