Square GEN 3

Square GEN 3 is a microprismatic or opal luminaire with a uniform and even light distribution for offices, schools and general lighting. Backlit technology + lens optics allow high luminous efficacy and energy efficiency. In addition, the luminaire has a low carbon footprint. Weighs only 1.92kg.

New

Area of use: schools and offices
Installation: ceiling surface, suspension and flush mounting

Benefits

Square GEN 3 DALI versions can be easily switched from DIP switch to Microprism 43/29/20W and OPAL 29/20/18W. The luminaire is slim, only 25mm thick. Control options are DALI 2 and NLC or Casambi wireless control.

Applicability

Square GEN 3 microprismatic luminaire for glare-free lighting. DSE workplace lighting glare requirements (EN 12464-1: DSE L65 ˂ 3000 cd/m²) and WELL certification glare requirements (L45/90 <6000 cd/m²) are undercut by the following versions. Similarly, the lobby EN 12464-1 and WELL certification glare requirements (L45/90 <6000 cd/m²) are achieved with 6081lm (43W), which are less necessary due to the luminous efficacy. It is generally recommended to always use the 43W version, which is optimised to the space requirement at the time of programming commissioning. LDT luminaire distribution files can be found for 43W, 29W and 20W versions, but it makes most sense to optimise with DIALUX to the correct required installation power, giving the optimum energy efficiency for the building in kWh/m².

Colour temperature:
4000K (3000K,5000K) ⁽¹

Colour rendering index:
RA≥ 80 (90)

Optics:
Microprism, Opal

Light source protection:
PMMA(Lens)+PS(Diffuser)

Enclosure class:
IP20/IP50 ⁽²

Supply voltage:
220-240 Vac

Frequency:
50-60 Hz

PF:
>0,9

THD:
<20%

Connection:
Connection to a chain box with spring connector 2 x 5 x 2.5 mm² (DALI) or 2 x 3 x 2.5 mm² (CASAMBI and NLC).

Controllability:
DALI ⁽³, NLC⁽⁴, CASAMBI⁽⁴

Colour:
White

Body material:
Aluminium/steel

Warranty:
5 years. STUL warranty 2 years.

Accessories (installation):
- C8950067 Surface mounting frame 600x600

- C8950074 Surface mounting frame 300x1200

- C9500007 Surface mounting brackets 4 pcs.

- C9500008 Suspension cable set 2m 4 pcs.

Comments:
1) SDCM ≤ 3

2) IP20 above the luminaire and IP50 below the luminaire

3) In DALI versions, the luminaire power can be changed by means of a DIP Switch on the ballast (MP versions 43W->29W or 20W, Opal versions 29W->20W or 18W).

4) In NLC and CASAMBI versions the power is not changeable by DIP Switch